What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Touch N Foam No Warp, Window & Door Sealant, Aerosol-03/18/2016
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaTouch N Foam No Warp, Window & Door Sealant is specially formulated for use around window and door frames. While it can be used as an all-purpose foam, This revolutionary expanding polyurethane foam is designed to air seal without exerting pressure that can be detrimental to window or door frame stability. This low pressure foam is actually self-venting which means that once it fills the void, the trapped CO2 leaves the product , unlike conventional polyurethane foam that may continue to expand and apply pressure. This is ideal for sensitive areas (like window and door frames where the gap can be sealed without bowing the frame, even if the area is overfilled with foam). The end result is an air-tight seal around windows and doors that lowers energy costs.
Purpose of product.
Usage: Window and door frame insulation and sealant.Structure such as solid, liquid, aerosol etc.
Form: aerosolDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 20242400 Boston Street, #200
Baltimore MD 21224
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Methylene bisphenyl diisocyanate (MDI) 000101-68-8 25.0-40.0 Yes 
CoC List
Urethane prepolymer Diphenylmethane-diisocyanate 026447-40-5 5.0-10.0 No Dimethyl ether 000115-10-6 5.0-10.0 No Isobutane 000075-28-5 2.5-5.0 Yes CoC List
Propane 000074-98-6 1.0-2.5 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :March 18, 2016 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 137.0
-
Warnings
Hazard Statements
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause harm to breast-fed children. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure.
Precautionary Statements
Prevention
Obtain special instructions before use. Avoid contact during pregnancy/while nursing. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Pressurized container: Do not pierce or burn, even after use. Do not breathe mist/vapors/spray. In case of inadequate ventilation] wear respiratory protection. Do not spray on an open flame or other ignition source. Wash thoroughly after handling. Wear protective gloves and eye protection. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace.
Response
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.
If experiencing respiratory symptoms: Call a POISON CENTER/doctor. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing.
If eye irritation persists: Get medical advice/attention. Get medical advice/attention if you feel unwell.
IF exposed or concerned: Get medical advice/attention.
Storage
Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 deg C/122 deg F. Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations. -
Acute health effects
From SDS:
Emergency Overview
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause harm to breast-fed children. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure.
Potential Health Effects
Eye Contact: Irritating effect.
Skin Contact: Irritant to skin and mucous membranes. Sensitization possible through skin contact.
Inhalation: Inhalation of concentrated vapors as well as oral intake will lead to anaesthesia-like conditions and headache, dizziness, etc. Sensitization possible through inhalation. -
Chronic health effects
From SDS:
Inhalation of concentrated vapors as well as oral intake will lead to anaesthesia-like conditions and headache, dizziness, etc. -
Carcinogenicity
IARC: 4,4- methylenediphenyl diisocyanate (MDI) CAS No. 000101-68-8
-
Handling information
Keep away from heat and direct sunlight. Use only in well ventilated areas. Keep ignition sources away. Do not smoke. Keep respiratory protective device available. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 120 deg F / 49 deg C, i.e. electric lights. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Emergency cooling must be available in case of nearby fire. Observe official regulations on storing packagings with pressurized containers. Provide ventilation for receptacles. Avoid storage near extreme heat, ignition sources or open flame. Store away from foodstuffs. Store away from oxidizing agents. Store in a cool place. Heat will increase pressure and may lead to the receptacle bursting.
-
Disposal information
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Can be disposed of with household garbage after solidification following consultation with the waste disposal facility operator and the pertinent authorities and adhering to the necessary technical regulations.
-
California Prop. 65 Warning
Not listed.
-
First Aid
Eye Contact: Immediately remove contact lenses if possible. Rinse opened eye for several minutes under running water. Then consult a doctor.
Skin Contact: Do not pull solidified product away from the skin. Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Inhalation: Supply fresh air; consult doctor in case of complaints. Provide oxygen treatment if affected person has difficulty breathing. In case of unconsciousness place patient stably in side position for transportation.
Ingestion: Rinse out mouth and then drink plenty of water. Do not induce vomiting; immediately call for medical help.
-
UN Global Harmonization Classification
